Upon powering up a computer, the Basic Input/Output System (BIOS) loads in preparation for Windows to run. In addition, it controls how your computer interacts with peripherals like a mouse and keyboard. Last but not least, you can use it for troubleshooting and adjusting various parameters. Unfortunately, getting into BIOS isn’t like opening a file or folder.
You’ve found the proper location if you’re curious in getting into BIOS in Windows 11. This post will show you a variety of approaches so you can pick the one that best suits your needs.
Instructions for Accessing the Windows 11 BIOS
Many Windows 11 issues can be fixed by entering the BIOS setup menu. On the other hand, BIOS isn’t a regular folder like the rest of your files. It’s possible to access the preferences in a number of different ways:
Startup with Windows 11: Getting to the BIOS
In Windows 11, the BIOS menu is most often accessed during startup. To access the BIOS, users must hit the designated key. So, here’s what you do:
- Activate the laptop.
- Once the computer starts booting up, press the designated key to access the main menu.
The system’s BIOS screen should load after that. Use the menus to make the adjustments you need.
It’s important to remember that not all computer makers use the same BIOS access key. The key may be F2, F10, F1, or F12, however this varies by computer brand. We suggest visiting the manufacturer’s website or the manual if you are unsure of the correct key to press. This data is also displayed on the initial boot-up screen. However, keep in mind that not all laptop and computer models display this data.
This is the quickest approach, but it involves a bit of preparation time. If your computer powers up in a matter of seconds, this could be an issue since you wouldn’t have time to press the necessary key before it started up. The good news is that there are alternate routes into BIOS.
The Windows 11 Control Panel’s Guide to the BIOS
You can enter BIOS through Settings if you either forgot to hit the allocated BIOS key at startup or were too slow to do so. Get it done by following these steps:
Click the cog symbol in the lower right of the Start menu to enter the system’s configuration options.
- Make a selection under “System” on the left side of the screen.
- Click the “Recovery” button on the right.
- Next to “Advanced startup,” click “Restart now.”
- A notice reading “We’ll restart your device so save your work” will appear. Choose “Restart immediately” if you want to continue where you left off.
- There will be a dropdown menu with three choices. Select “Troubleshoot” to begin investigating the issue.
- To access “Advanced Options,” select it.
- To restart with UEFI firmware settings, click “Restart.”
- A BIOS setup is entered.
This technique of entering the BIOS takes longer than entering it during startup, but it is a failsafe alternative if you aren’t in a rush.
In Windows 11, the Command Prompt Is Your Key to Getting Into The BIOS
Accessing BIOS can be performed via a variety of task automation and configuration management tools, including PowerShell and Terminal. Here are the measures to take:
- Just launch the thing that you like to use.
- Just hit the “Enter” button after typing “shutdown /r /o /f /t 00” or “shutdown.exe /r /o.”
- There will be a plethora of choices presented to you. Make a choice to “Troubleshoot.”
- Choose “More Settings” to get other customizations.
- Enter the “UEFI Firmware Settings” menu.
- Select “Restart”
The machine will restart and boot into the BIOS without your intervention.
Use This Shortcut to Quickly Enter BIOS on Windows 11
If you find yourself frequently entering the BIOS, you can assign it a keyboard shortcut. The procedure is as follows:
- To create a shortcut on your desktop, right-click the empty space there, then pick “Shortcut” from the drop-down menu that appears.
- Put the item’s address in the “Type the Location” box. Just type “shutdown /r /o /f /t 00” and you’ll be good to go.
- To continue, click “Next” and follow the on-screen prompts.
Here’s how to launch BIOS once the shortcut has been created:
- To use, simply double-click the link.
- To begin troubleshooting, select it.
- Choose the “Advanced” tab.
- Choose “UEFI Firmware Settings.”
- To begin again, click the “Restart” button.
By default, most computers will boot straight into the BIOS.
The Shift+Restart Method for Accessing the Windows 11 BIOS
Follow these steps to gain unrestricted access to the BIOS in Windows 11:
- Press and hold Shift, then click the Power button, and then select “Restart” from the lock or sign-in screen.
- Clicking this button will bring up the Advanced Startup menu. Select “Troubleshoot” to begin diagnosing the issue.
- Click the “Advanced” button.
- Go into the “UEFI Firmware Settings” menu option.
- Choose “Restart.”
If you are a registered user, you can perform the same actions:
- To access the Start menu while holding Shift, do the following:
- Choose the “Power” button.
- Simply click “Restart.”
- On the Advanced Startup screen, click the “Troubleshoot” button.
- Pick the “Advanced” tab.
- Select “UEFI Firmware Settings” from the menu.
- The “Restart” button must be pressed.
Using the Run Window to Enter the BIOS on Windows 11
Using Windows 11’s Run window is an alternative method of entering BIOS. To complete this, please read and follow the steps below:
- When you press the Windows key plus R, the Run dialogue box appears.
- Press Ok or Enter after typing “shutdown /r /o /f /t 00.” There’s also the slower “shutdown.exe /r /o” command you can use instead.
- Click on the menu item labelled “Troubleshoot.”
- Pick the “Advanced” tab.
- Pick “UEFI Firmware Settings” from the menu.
- Choose “Restart.”
Surface Pro 11 BIOS Access in Windows 11
Windows 11 is preinstalled on certain Surface Pro devices and can be installed on others. Getting into BIOS on a Surface Pro is simple, as demonstrated here.
- Put your tech to sleep.
- Hold down the Volume-Up key (the plus sign).
- Keep the Volume Up button held down as you hold and release the Power button. Release the Volume Up button when you see the Microsoft or Surface logo. The Surface Pro BIOS setup screen has to be accessed at this time.