How To Fix ‘Avast Won’t Open’ Issue

The primary server can be restarted if there are any issues with it. You can verify if the fault has been repaired or not after a restart.

When The Avast Setup Process Failed

Avast’s installation process can get corrupted for a variety of reasons, but it can be fixed by either fixing or reinstalling the programme. Here are six simple ways to fix Avast on Windows 10 if it won’t open:

How to Fix Avast Won’t Open Issue Using Effective Troubleshooting Methods (Windows 10 Edition)

Because the Avast problem may be so frustrating and inconvenient for many users, our team has put together the best available solutions that can be used to fix this issue quickly and easily.

Read Also:

  1. Not Registered On Network
  2. Err_Connection_Timed_Out
  3. Dns_Probe_Finished_No_Internet

1. A Clean Boot 

A boot can assist users in determining the source of any errors they encounter. When the system is in safe mode or if you conduct a clean boot, only essential files and folders are used to execute.

To learn how to boot your operating system, follow these instructions in the exact order.

Step 1: To open the Windows Run dialogue box, press the Windows+I keys simultaneously. In the same box, type “MSConfig” and hit “ok” to access the “system configuration” window.

Step 2: open Windows 10’s Run dialogue box. Make sure “Hide all Microsoft devices” is checked in your system setup window’s “services tab.”

Step 3: Selecting “disable all” will take you to the next stage. Disable the option. Then select “open task manager” from the “startup tab” menu. Similarly, if no processes are currently running, click the close button to end the session.

Restart your operating system when you’ve finished by clicking “ok” in the system configuration window. If the problem persists, proceed to the next step.

 2. Using Avast 

As a common cause of Avast not working, many users fail to update their operating system or Avast application. The following steps are all that is required to complete the update procedure;

Avast can be found on your device by going to the programmes menu, selecting “update,” and then clicking “update.” Avast’s application update window has opened.

Click “check for updates” and wait while the application checks for and instals the necessary files for any pending updates that are ready to be installed. A notice will appear on your screen once the update procedure is complete, indicating that your Avast application has been updated.

Step 1: To begin, press Windows+I to bring up the settings menu on your computer’s screen. To continue, you’ll need to select the “update and security” option from the settings window.

Step 2: Simply select the “windows update” option on the left side of your screen in the following box. The next step is to select the “check for updates” option and the operating system will automatically download any updates that are available.

Check to see whether the error still occurs with Avast after you have done the steps in the correct order. You can try the following if the Avast application still does not work after the latest update.

 3. Verifying The Avast Setup

If you are unable to find the Avast application in the “programmes and features” box, there is a potential that the application was not successfully installed. This is how you check if the software was properly set up on your computer.

Step 1: Begin by selecting “programmes and features” from a list of options that display when you right-click your Windows icon.

Step 2: You’ll need to check the same menu to see if the Avast option is there. There may be an issue with your device’s installation of the application and you may need to download and reinstall it.

Check out the next solution if that isn’t the case and the application is still causing problems for you.

4. Avast’s Antivirus Service

Your Windows 10 computer’s inability to run Avast antivirus software could be the result of an Avast-related error. Restarting your computer may help you fix problems with Avast antivirus, and you can easily do so by following the steps outlined here.

Step 1: To begin, press “Windows+R” on your keyboard to bring up the Windows run dialogue box. The services tool can be accessed by typing “services.MSC” into the “Services” dialogue box and clicking “ok”.

Step 2: In the next window, when the control panel appears, use the option at the top right corner of your screen to switch the view to large icons. Afterwards, you’ll need to scroll down to the “administrative tools” option and click on it. Once you’ve located it, simply click on it.

Step 3: You’ll need to locate the “services shortcut” option at the bottom of your screen in order to proceed to the next step. To get there, use the same button you used to get here.

Step 4: Right-click on the “Avast antivirus service” and select “properties” from the menu that appears on your screen to access the service’s settings.

Step 5: You can stop the Avast process by clicking on the “stop” button in the middle of the window if it has already started. Unless you start again from the beginning, you should leave things as they are until you are ready to begin again.

Step 6: Make sure the service’s properties window has the option under the startup type menu, the mode set to automatic, before you start again.

Step 7: When you try to alter the startup type, a dialogue box will appear. Click the “confirm” button to continue the process. As soon as you are done, you can press the “OK” and “Apply” buttons.

Before closing the window, simply press the start button. As soon as you finish this, you may see the message:

 5. Ensure Application

The easiest approach to ensure that you don’t have any issues with any application is to install it correctly. In comparison to frequent updates, a clean install is more beneficial because it removes all faulty or broken registry entries as well as the cache files, which may be the source of your current problems.

Following are the simple steps to performing a fresh install:

Step 1: To get started, open a web browser and type in this link into the address bar. It is necessary to click on the “download free antivirus” button located in the middle of the Avast website in order to begin the installation process.

Step 2: There, you’ll also need to download and save the “Avast uninstall utility” from the same site. You can now disconnect your device from the internet and select “boot mode” once all of the files have been downloaded.

Step 3: Use the Windows+R keys to open a command prompt and type “MSConfig” in the text field. Click the “OK” button to proceed. The “boot tab” will be visible once the system configuration has been opened.

Step 4: Click on “OK” to restart the computer in safe mode after ticking the “safe boot” option box. It’s as simple as running the Avast uninstall software and browsing to the spot where you installed Avast. It’s easy to find the folder you’re looking for by using the “file browser.”

Finally, click the “uninstall/remove” button and restart your computer to see if Avast can be used regularly after the reboot.

 6. You Can Fix Avast by Reinstalling It

This is by far the best solution for Windows customers who are having issues with Avast antivirus. To fix the Avast app on your phone or tablet, please follow the instructions below.

Since a user cannot delete programmes from their system using any other account, utilise a “administrator account” to gain access to your computer.

Step 1: On the “Windows start menu,” type “control panel app” in the search box to find the app and go on. In the control panel, go to the top right corner and select “view by category” from the list of options.

Step 2: To uninstall a software, click on the “programmes” tab, then select the “uninstall a programme” option. There is an option to uninstall a software. The next step is to identify the “Avast” programme and then click the “uninstall/repair” button when you find it.

You’ll receive a pop-up message when the application is fixed. You will be prompted to acknowledge the pop-up message, and the Avast application will be restored to its default settings.

It’s time to check if this cures the Avast problem for you, so click “complete” and restart your computer to find out.Let’s have a look at a few more options that may be useful to the users.

Avast Won’t Open Issues in Other Ways

Users should be aware that in addition to the problems listed above, a variety of other problems can arise. When it comes to Avast, you may run into the same problems. As a result, the next section of the blog is devoted to discussing other difficulties that may arise.

Here are some possible causes of the dreaded “Avast won’t open” error. In Windows 10, Avast is not recognised in the Action Center. Generally speaking, the “WMI Repository” contains meta-information about WMI classes.

If the WMI is abused in any way, you run the risk of encountering an error. This is why Avast won’t operate and Avast won’t detect Windows. This issue can be solved by verifying the WMI repository.

Using WMI Repository Verification

Step 1: Go ahead and start by clicking “ok” in the run dialogue box and typing “cmd”. Your computer will then launch into command-prompt mode and ask for the command “winmgmt/verifyrepository,” which you should write and then press “enter” to complete.

Step 2: Enter the command “winmgmt/resetrepository” again if the repository appears to be consistent. If the command “winmgmt/salvagerepository” doesn’t work, try “winmgmt/salvagerepository.”

Once the repository has been successfully rebuilt, you can test to see if Windows can again detect Avast.

Read Also:

  1. APC Index Mismatch Windows 10
  2. 10 Windows Keyboard Shortcut Keys That Will Save Time
  3. Gaming Features Aren’t Available For The Windows Desktop

Windows 10 Black Screen Problem

The “black screen issue” has been reported by several users after the initial installation of the Avast programme for Windows 10. Even though it’s not a big deal, here’s how to remedy it if you’ve ever had it.

The addition of Exception in Avast!

Step 1: Launch Avast by clicking on the icon on your desktop. To continue, click on “menu” and then “settings” in the right pane to access the menu options.

Step 2: Add an exception by clicking on the “add exception” button in the “general” tab and selecting “exceptions.” Enter the path “C:WindowsExplorer.exe” into the field and then click “add exception” on the “create exception” button.

Finally, restart your computer to verify if the black screen issue is repaired once you have included this exception.